Ceilings painting tips are as easy to paint as the walls
Ceilings painting tips are easy to paint as the walls, when using the right paint and tools. An extension pole will make painting ceilings easier and better organized. You would be able to reach the ceiling without having to use a ladder. You have to do the necessary pre work. Dust and grime build up, making it almost impossible for paint to stick. Mildew and water stains will bleed through even the best paint. Cracks, marks, and dents are more visible in the false light that usually reflects off ceilings.
The key to painting a ceiling and getting better ceiling results is careful preparation, priming, and the use of quality paints. Ceilings can be an important part of your color palette, for instance, if you want to bring the ceiling down for a cozier room, paints it a darker color. For a light, airy feeling, paint the ceiling the lightest hue of blue.
Tools you would need; screwdriver, utility knife, paint pad, 9-inch roller cover with the suitable nap, brushes, 3-inch putty knife, 1-quart paint bucket, rubber sanding block, roller cage with extension handle, paint tray, 4-foot stepladder, safety goggles, and painter’s cap. Material may vary; plastic drop, 2-inch painter’s masking tape, paper drop cloth, latex ceiling paint, and clean cotton rags.
Now you are ready to paint the ceiling, remove the furniture from the room, or towards the center, if you have ceiling fixtures, turn the lights off and wrap the fixture in plastic. Mask off the tops of the walls with 2-inch painter’s masking tape. Cover the floor with drop cloths; protect windows, doors, and trim, if needed. To start, cut in one corner of the ceiling with a paintbrush. Cut in only as much as you can roll out before the paint dries. Begin rolling over the still-wet cut-in strip.
Keeping a wet edge prevents overlap marks in the finished ceiling. Load the roller frequently and roll slowly. Back-roll to blend the paint. Work in sections to keep wet edges. Cut in with a brush, apply paint with a roller, and then roll out applied paint to blend the two areas. Continue applying paint, rolling out and blending until the first cut-in section is finished. For better results, roll in the direction of the shorter room dimension to reduce the drying time between passes. This gives you time to feather the wet paint, avoiding overlap marks. Keep an eye open for drips and spatters. Wipe up immediately with a damp rag.
|
